不銹鋼橋架在安裝時需要注意
在我們生活中，使用不銹鋼橋架時難免會遇見一些問題，那我們對于不銹鋼橋架安裝時應該注意些什么呢，在安裝的時候都應該注意其，不銹鋼橋架安裝的注意事項下面看看：
In our life, we will inevitably encounter some problems when using stainless steel bridge. What should we pay attention to when installing stainless steel bridge? We should pay attention to its safety when installing it. The precautions for installing stainless steel bridge are as follows:
不銹鋼橋架
Stainless steel bridge
1:檢查外觀
1: Check appearance
在安裝之前需要先檢查下不銹鋼橋架的外觀，看下表面是不是平整光滑，不要出現掉漆的情況，同時看下鋼材之間的焊接是不是結實。
Before installation, it is necessary to check the appearance of the stainless steel bridge to see whether the lower surface is flat and smooth without paint falling off, and whether the welding between steels is solid.
2：檢查距離
2: Check distance
不銹鋼橋架的安裝要確定好具體的位置，同時各個層之間要留距離，同時如果有其他的管道平行著，要保證規定的距離，避免互相干擾。
The specific position of the stainless steel bridge shall be determined, and the distance between each layer shall be reserved. At the same time, if there are other pipes parallel, the specified distance shall be ensured to avoid mutual interference.
3：
3: Security
不銹鋼橋架的安裝不管是采用固定的還是懸掛的，都一定要看好各個部件之間連接的是不是緊固，不能有松動的現象，保證施工。
The installation of stainless steel bridge, whether fixed or suspended, must be sure to check whether the connection between various parts is tight, and there should be no looseness, so as to ensure construction safety.
以上就是為大家介紹的有關電纜橋架的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hongxingbm.com
The above is a detailed introduction about cable tray for you. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.hongxingbm.com
