The cable tray bears three loads:

濟南電纜橋架再在電纜鋪設工程中，電纜橋架是電纜的重要支柱，它承載著電纜的所有重量和所有外界的荷載，所以，在生產時一定要注重它的承載能力，下面濟南電纜橋架生產廠家對它的承載力做了一下分析，一起來了解一下吧：

Jinan cable bridge in the cable laying project, cable tray is an important pillar of the cable, it carries all the weight of the cable and all external loads, so, in the production must pay attention to its bearing capacity, the following cable tray manufacturers to its bearing capacity analysis, let's understand it:

濟南電纜橋架的承載能力是由荷載來決定的，它的荷載分為靜荷載、動荷載和附加荷載，靜荷載是指敷設在橋架內的電纜種類、根數、每根的外徑重量/單位長度，按電纜敷設的不同路由分別列表統計。

The bearing capacity of Jinan cable bridge is determined by the load. Its load is divided into static load, dynamic load and additional load. Static load refers to the type, number of cables laid in the bridge, and the outer diameter weight / unit length of each cable, which are listed and counted according to different routes of cable laying.

濟南電纜橋架動荷載是指橋架安裝和維護過程中施工維修人員的重量，對于輕型電纜橋架，一般不考慮動荷載，即不允許在橋架上站（行）人，如果需要考慮站人，則應將跨距適當縮小。

Dynamic load of Jinan cable bridge refers to the weight of construction and maintenance personnel in the process of bridge installation and maintenance. For light cable bridge, dynamic load is not considered generally, that is, people are not allowed to stand (walk) on the bridge. If people need to be considered, the span should be appropriately reduced.

附加荷載僅在室外是指冰雪、風和電磁力所形成的荷載，它與安裝場所的地區自然氣象條件和帶電體的性質有關，設計中應根據各種條件加以計算。

The additional load only refers to the load formed by ice, snow, wind and electromagnetic force outdoors. It is related to the natural weather conditions of the installation site and the nature of the charged body. It should be calculated according to various conditions in the design.

看了上面電纜橋架生產廠家給我們做的分析，我們可以看出來電纜橋架所承受的荷載很多，所以，在生產中一定要考慮各種因素，提高它的質量和承載能力！

Looking at the above cable tray manufacturer's analysis for us, we can see that the cable tray bears a lot of loads, so, in the production, we must comprehensively consider various factors to improve its quality and bearing capacity!