濟南電纜橋架安裝前如何確定偏向
橋架一般作為配線工程的配套項目使用，目前沒有專門的典型指導，各廠家的規范形式缺乏通用性，因此，規劃選擇過程中應根據電氣系統電纜的典型、數量，合理選擇實用的橋架。
The cable tray is generally used as a supporting project of the wiring project. At present, there is no special typical guidance, and the specification form of each manufacturer is lack of universality. Therefore, in the process of planning and selection, the practical cable tray should be reasonably selected according to the typical and quantity of electrical system cables.
在施工前，根據建筑物的布局確定橋架框架的道路，根據空調管道、電氣管道等的聯合設置環境，便于維護，以及電纜布線的密度。在室內，盡可能沿著建筑的墻壁、柱子、橫梁和地板直立。如果需要一個綜合管廊，安裝在平行或以上的管道。考慮到下線和干線。
Before construction, determine the best road of the bridge frame according to the layout of the building, set the environment according to the joint setting of air conditioning pipes, electrical pipes, etc., to facilitate maintenance, and the density of cable wiring. Indoors, as far as possible, stand upright along the walls, columns, beams, and floors of the building. If an integrated pipe gallery is required, it shall be installed in parallel or above pipes. Consider downlines and mainlines.
以上是濟南電纜橋架廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.hongxingbm.com
The above is the relevant content introduced by Jinan cable bridge manufacturer. If you want to know more, please visit the website: http://www.hongxingbm.com
