選擇電纜橋架的時候，注意規格要求很重要！
我們都知道，電是不可以觸摸的，接入室內的電都需要一定的載體。我們看到，一般工礦企業室內外架空敷設電力電纜，控制電纜，和電信、廣播電視等部分室內外的電力電纜，都需要用到電纜橋架，那么，電纜橋架在選擇時需要按照哪些規則來選擇呢？濟南電纜橋架提示大家，選擇電纜橋架的時候，橋架規格是十分重要的一項！
As we all know, electricity can not be touched, and access to indoor electricity requires a certain carrier. We can see that the general industrial and mining enterprises indoor and outdoor overhead laying of power cables, control cables, and telecommunications, radio and television and other parts of indoor and outdoor power cables, all need to use cable bridge, then, what rules should be followed in the selection of cable bridge? Jinan Cable Bridge Frame reminds you that when choosing cable bridge, the specifications of the bridge frame are very important!
1.在選擇附件時，要尤其注意：各種附件要符合工程標準而且還要與橋架相配套；
1. When choosing accessories, special attention should be paid to: all kinds of accessories should conform to engineering standards and be matched with the bridge;
2.對于支、吊架的選擇，要按照橋架的規格、跨度、層數等規格條件來配置，而且要特別注意滿足負載的要求，超重負載都會帶來橋架的損害；
2. For the selection of support and suspension, it should be arranged according to the specifications of the bridge, such as the size, span and number of stories. Special attention should be paid to meeting the requirements of the load. Overweight load will bring damage to the bridge.
3.電纜橋架在選擇時需要一定的高度和寬度，而且在選擇時要注意電纜真充率不能超過有關標準規范的規定值，控制電纜可參照50~70%的標準來取值，同樣的動力電纜可取40~50%，并且還需要予留10~25%的發展余量；
3. Cable bridge needs certain height and width when choosing, and when choosing, we should pay attention to the fact that the true charge ratio of cable can not exceed the stipulated value of relevant standards and specifications. The control cable can be selected according to the standard of 50-70%, the same power cable can be taken 40-50%, and the development margin of 10-25% should be allowed.
4.另外，橋架橫截面積的選擇要參照一定的規格表來選擇：比如，0-60安的橫截面積能的允許的小值為129mm等等。
4. In addition, the selection of the cross-sectional area of the bridge should refer to certain specifications: for example, the allowable small value of the cross-sectional area energy of 0-60 A is 129 mm, etc.
以上就是今天由濟南電纜橋架的小編給大家提供的精彩內容了，想要了解更多的相關資訊，歡迎更多的小伙伴加入我們：http://www.hongxingbm.com
Above is the wonderful content provided to you by Jinan Cable Bridge Frame Editor today. For more information, we welcome more partners to join us: http://www.hongxingbm.com.
